Completed plumbing work including repairs, installations or system upgrades, carried out by our team.
Our Projects
Our Plumbing & Heating Projects in South Wales
Explore a selection of plumbing, heating and boiler installation projects completed by Heatworks Plumbing and Heating, including work across South Wales and detailed case studies from more specialist heating and ventilation installations.
Featured case studies: see our warm air heating conversion to zoned wet central heating, where a large ducted warm air system was replaced with radiators, underfloor heating and hydronic plinth heaters, and our MVHR replacement and commissioning in Ystradgynlais, involving the replacement of two failed 26-year-old MVHR units and recommissioning of the existing ventilation system.
Our work includes everything from full central heating installations and boiler replacements to bathroom refurbishments, plumbing upgrades, renewable heating and specialist ventilation systems. Every project is carried out with a focus on correct installation, reliability and long-term performance.
We regularly complete projects in
Bridgend,
Cardiff,
Swansea,
Neath and
Port Talbot, working across a wide range of property types including older homes, new builds and full refurbishments.
Types of Projects We Carry Out
Our projects cover a wide range of plumbing, heating and ventilation work, including:
Full CH Install.
Central Heating Installation
Warm Air Heating Conversion to Wet Central Heating
MVHR Replacement and Commissioning in Ystradgynlais
Gas Main Installation
Hot and Cold Outside Taps
Hot Water Cylinder Swap
Kitchen Renovation & Installation
Gym Sauna Conversion
Boiler Swap
Bathroom, Kitchen,
Cloakroom &
Full Central Heating
Bathroom
Bathroom &
Cloakroom
Designer
Radiators
Bathroom
Boiler Swap
Bathroom
Bathroom
Bathroom
Boiler and Cylinder
Boiler Swap
Boiler and Cylinder
Bathroom
Boiler and Cylinder
Bathroom
Boiler and Cylinder
Boiler and Cylinder
Boiler Swap
Bathroom
Bathroom
Boiler and Cylinder
Bathroom
Boiler Swap
Bathroom
Bathroom &
Utility Room
Boiler Swap
Boiler Swap
Commercial Cloakroom
Boiler Swap
Cold Main Risers
Disability Bathroom.
En-Suite.
Full CH and Cylinder.
Full CH Install.
Completed plumbing work including repairs, installations or system upgrades, carried out by our team.
Hot and Cold Outside Tap Installation Project
This project involved installing separate hot and cold outside taps to provide convenient external water supplies for cleaning, gardening and general household use.
Outside taps need to be installed correctly with suitable isolation, secure pipework and appropriate backflow protection. As part of our professional plumbing services, external water supplies are installed with safety, durability and reliable long-term use in mind.
Scope of Work
- Installation of hot and cold outside taps
- Routing of new pipework from the internal water supplies
- Core drilling through the external wall
- Installation of suitable isolation valves
- Secure fitting of the external tap connections
- Final testing and leak checks
Installation Approach
The internal water supplies were assessed before the new hot and cold pipework was routed to the external wall.
Openings were formed carefully for the new pipework, and the external taps were positioned to provide convenient access while maintaining a neat finish. The pipework was securely fixed and protected where required.
Suitable isolation and backflow protection were incorporated into the installation, allowing the external water supplies to be controlled safely and maintained when necessary.
Once the work was complete, all connections were thoroughly tested to confirm reliable flow and leak-free operation.
End Result
The completed installation provides convenient access to both hot and cold water outside the property.
The securely fitted taps, protected pipework and tested connections have created a practical and durable setup suitable for cleaning, gardening and other everyday outdoor tasks.
Need Hot and Cold Outside Taps Installed?
Heatworks installs hot, cold and combined outside water supplies throughout South Wales.
We can assess the existing plumbing, identify a suitable tap position and complete the required pipework, isolation and safety measures.
Completed heating work including system installation, upgrades or repairs, carried out by qualified engineers
Cold Water Main Riser Installation Project
This project involved installing and altering cold water main riser pipework to improve the water supply arrangement within the property.
Cold water risers must be planned and installed correctly to provide reliable flow, maintain suitable pressure and support the property’s wider plumbing system. As part of our professional plumbing services, we install and upgrade water supply pipework with long-term reliability and ease of maintenance in mind.
Scope of Work
- Installation and alteration of cold water main riser pipework
- Adjustments to the existing water supply connections
- Associated plumbing alterations where required
- Pressure testing and system checks
- Final inspection of the completed installation
Installation Approach
The existing water supply arrangement was assessed before the new riser pipework was routed and installed to suit the layout of the property.
Careful attention was given to the positioning of the pipework, joints and connections to create a neat and dependable installation while maintaining practical access for future inspection and maintenance.
All connections were checked thoroughly before the completed system was pressure tested to confirm reliable flow and leak-free operation.
End Result
The completed installation provides a dependable cold water supply arrangement with neatly routed pipework and secure connections throughout.
The upgraded riser system is designed to support reliable day-to-day operation and provide a durable foundation for the property’s wider plumbing services.
Need Cold Water Pipework Installed or Upgraded?
Heatworks carries out cold water main, riser pipework and general plumbing installations throughout South Wales.
We can assess your existing water supply, identify any necessary alterations and recommend a practical solution for your property.
System Boiler and Unvented Cylinder Installation Project
This project involved installing a new system boiler and unvented hot water cylinder to provide reliable heating and strong hot water performance throughout the property.
System boiler and cylinder installations need to be designed correctly around the property’s heating requirements, hot water demand and available installation space. As part of our boiler installation services and unvented hot water cylinder installations, each system is planned with safety, efficiency and long-term reliability in mind.
Scope of Work
- Installation of a new system boiler
- Installation of an unvented hot water cylinder
- Pipework connections and alterations where required
- Installation of the relevant controls and safety components
- Full testing and commissioning of the heating and hot water system
Installation Approach
The boiler and cylinder were carefully positioned and configured to suit the property layout and expected demand for heating and hot water.
The associated pipework, controls and safety components were installed and connected so the boiler and cylinder could operate together as one complete system. Careful attention was given to the arrangement of the pipework and the accessibility of the equipment for future servicing and maintenance.
Once the installation was complete, all controls, connections and safety devices were checked thoroughly. The complete heating and hot water system was then tested and commissioned to confirm safe, reliable and consistent operation.
End Result
The completed installation provides dependable heating and strong hot water performance across multiple outlets.
The system boiler, unvented cylinder, controls and associated pipework have been configured to create an efficient and practical setup designed for reliable long-term use.
Need a System Boiler and Unvented Cylinder Installed?
Heatworks installs system boilers and unvented hot water cylinders throughout South Wales.
We can assess your property’s heating requirements, hot water demand and available installation space before recommending a suitable boiler and cylinder combination.
Contact Heatworks to discuss your boiler and cylinder installation.
System Boiler and Cylinder Installation in a Loft
This project involved installing a new system boiler and hot water cylinder within a loft space, creating a practical heating and hot water system while making effective use of the available space.
Loft installations require careful planning to ensure the boiler, cylinder, pipework and controls are positioned safely, adequately supported and accessible for future servicing and maintenance. As part of our boiler installation services and hot water cylinder installations, each system is designed around the requirements of the property.
Scope of Work
- Installation of a new system boiler within the loft space
- Installation of a new hot water cylinder
- Pipework connections and alterations where required
- Installation of the relevant controls and safety components
- Full testing and commissioning of the heating and hot water system
Installation Approach
The boiler and cylinder were carefully positioned within the loft to make efficient use of the available space while maintaining suitable access for inspection, servicing and future maintenance.
The heating and hot water pipework was installed and connected to suit the layout of the property. Careful attention was given to the support, routing and protection of the pipework, together with the positioning of the controls and associated safety components.
This project was completed in Bridgend. Homeowners considering a similar installation can learn more about our boiler installation service in Bridgend.
Once the installation was complete, the boiler, cylinder and associated system components were thoroughly tested and commissioned to confirm safe, reliable and consistent operation.
End Result
The completed installation provides dependable heating and strong hot water performance while keeping the main system equipment neatly contained within the loft.
The boiler, cylinder, controls and pipework have been configured to create a practical and efficient system designed for reliable long-term use.
Need a Boiler and Cylinder Installed?
Heatworks installs system boilers and hot water cylinders throughout Bridgend and the surrounding South Wales area, including loft installations where the available space is suitable.
We can assess your heating requirements, hot water demand and proposed installation area before recommending the most appropriate boiler and cylinder arrangement.
Contact Heatworks to discuss your boiler and cylinder installation.
System Boiler and Cylinder Installation in a Garage
This project involved installing a new system boiler and hot water cylinder within a garage, creating a practical heating and hot water setup while making effective use of the available space.
Garage installations require careful planning to ensure the boiler, cylinder, pipework and controls are positioned safely, remain accessible for servicing and are protected against unsuitable conditions. As part of our boiler installation services and hot water cylinder installations, each system is designed around the requirements of the property.
Scope of Work
- Installation of a new system boiler within the garage
- Installation of a new hot water cylinder
- Pipework connections and alterations where required
- Installation of the relevant controls and safety components
- Full testing and commissioning of the heating and hot water system
Installation Approach
The boiler and cylinder were carefully positioned within the garage to make good use of the available space while maintaining suitable access for servicing, inspection and future maintenance.
The heating and hot water pipework was installed and connected to suit the layout of the property. Careful attention was given to the arrangement of the controls, safety components and associated connections so the boiler and cylinder could operate together as one complete system.
All pipework and components were checked thoroughly before the system was filled, tested and commissioned to confirm safe, reliable and consistent operation.
End Result
The completed installation provides dependable heating and strong hot water performance while keeping the main system equipment neatly contained within the garage.
The boiler, cylinder, controls and pipework have been configured to create an efficient and practical setup designed for reliable long-term use.
Need a Boiler and Cylinder Installed?
Heatworks installs system boilers and hot water cylinders throughout South Wales, including garage installations where the available space is suitable.
We can assess your heating requirements, hot water demand and proposed installation area before recommending the most appropriate boiler and cylinder arrangement.
Contact Heatworks to discuss your boiler and cylinder installation.
White and Blue Shower Room Installation Project
This project involved the complete renovation of a shower room, including removal of the existing fixtures, installation of a new suite and completion of the associated plumbing and finishing work.
The finished design combines clean white fittings with blue feature details to create a bright, practical and distinctive space. As part of our bathroom and shower room installation services, each project is planned around the available space, everyday usability and long-term reliability.
Scope of Work
- Removal of the existing bathroom fixtures and fittings
- Installation of a new shower, basin and toilet
- Alteration of the associated plumbing where required
- Installation of fixtures, fittings and finishing details
- Final testing and inspection of the completed installation
Installation Approach
The existing shower room was carefully stripped out before the new layout, fixture positions and plumbing requirements were assessed.
The shower, basin and toilet were installed securely, with careful attention given to alignment, access and the efficient use of the available space. The associated water supply and waste connections were adjusted where required to suit the new arrangement.
Any necessary improvements to the property’s existing plumbing system were completed as part of the work to support dependable long-term performance.
Before handover, all fixtures, fittings and plumbing connections were thoroughly tested to confirm safe, reliable and leak-free operation.
End Result
The completed shower room provides a modern, practical and attractive space with clean white fittings and distinctive blue feature details.
The new fixtures, updated plumbing and carefully completed finishing work have created a durable room designed for comfortable everyday use.
Need a Shower Room Installed?
Heatworks carries out complete bathroom and shower room installations throughout South Wales.
We can assist with removal of the existing suite, plumbing alterations, installation of new fixtures and completion of the associated work required to create a reliable finished space.