Completed plumbing work including repairs, installations or system upgrades, carried out by our team.
Our Projects
Our Plumbing & Heating Projects in South Wales
Explore a selection of plumbing, heating and boiler installation projects completed by Heatworks Plumbing and Heating, including work across South Wales and detailed case studies from more specialist heating and ventilation installations.
Featured case studies: see our warm air heating conversion to zoned wet central heating, where a large ducted warm air system was replaced with radiators, underfloor heating and hydronic plinth heaters, and our MVHR replacement and commissioning in Ystradgynlais, involving the replacement of two failed 26-year-old MVHR units and recommissioning of the existing ventilation system.
Our work includes everything from full central heating installations and boiler replacements to bathroom refurbishments, plumbing upgrades, renewable heating and specialist ventilation systems. Every project is carried out with a focus on correct installation, reliability and long-term performance.
We regularly complete projects in
Bridgend,
Cardiff,
Swansea,
Neath and
Port Talbot, working across a wide range of property types including older homes, new builds and full refurbishments.
Types of Projects We Carry Out
Our projects cover a wide range of plumbing, heating and ventilation work, including:
Full CH Install.
Central Heating Installation
Warm Air Heating Conversion to Wet Central Heating
MVHR Replacement and Commissioning in Ystradgynlais
Gas Main Installation
Hot and Cold Outside Taps
Hot Water Cylinder Swap
Kitchen Renovation & Installation
Gym Sauna Conversion
Boiler Swap
Bathroom, Kitchen,
Cloakroom &
Full Central Heating
Bathroom
Bathroom &
Cloakroom
Designer
Radiators
Bathroom
Boiler Swap
Bathroom
Bathroom
Bathroom
Boiler and Cylinder
Boiler Swap
Boiler and Cylinder
Bathroom
Boiler and Cylinder
Bathroom
Boiler and Cylinder
Boiler and Cylinder
Boiler Swap
Bathroom
Bathroom
Boiler and Cylinder
Bathroom
Boiler Swap
Bathroom
Bathroom &
Utility Room
Boiler Swap
Boiler Swap
Commercial Cloakroom
Boiler Swap
Cold Main Risers
Disability Bathroom.
En-Suite.
Full CH and Cylinder.
Full CH Install.
Kitchen Renovation Project
This project involved a complete kitchen renovation, including removal of the existing installation, fitting of new units and worktops, and the installation of the required plumbing and appliance connections.
A successful kitchen renovation depends on careful planning and coordination. The units, worktops, appliances and plumbing services all need to be positioned correctly so the finished space is practical, reliable and easy to use. As part of our kitchen installation services, we manage each stage with long-term functionality as well as appearance in mind.
Scope of Work
- Removal of the existing kitchen installation
- Installation of new kitchen units and cabinets
- Worktop preparation and installation coordination
- Installation of the kitchen sink and taps
- Connection of kitchen appliances
- Pipework alterations and upgrades where required
- Final fitting, testing and finishing
Installation Approach
The kitchen layout was carefully set out before installation began, ensuring the units, worktops and appliances were positioned correctly within the available space.
All cabinets were installed level and securely, with careful attention given to spacing, alignment and access to the plumbing services. Pipework and connections were altered where required to suit the new kitchen layout.
This project was completed in Cardiff. Homeowners planning a similar renovation can learn more about our plumbing services in Cardiff.
Before completion, the sink, taps, appliances and associated plumbing connections were fully tested to confirm safe, reliable and leak-free operation.
End Result
The completed renovation provides a clean, practical and well-organised kitchen with securely installed units and dependable plumbing throughout.
Careful coordination of the cabinetry, appliances and plumbing services has created a durable finished space designed for comfortable everyday use.
Planning a Kitchen Renovation?
Heatworks provides kitchen installation and renovation services throughout Cardiff and the surrounding South Wales area.
We can assist with the kitchen layout, installation, plumbing alterations, sink and tap fitting, and appliance connections required to complete the project properly.
Completed plumbing work including repairs, installations or system upgrades, carried out by our team.
Hot and Cold Outside Tap Installation Project
This project involved installing separate hot and cold outside taps to provide convenient external water supplies for cleaning, gardening and general household use.
Outside taps need to be installed correctly with suitable isolation, secure pipework and appropriate backflow protection. As part of our professional plumbing services, external water supplies are installed with safety, durability and reliable long-term use in mind.
Scope of Work
- Installation of hot and cold outside taps
- Routing of new pipework from the internal water supplies
- Core drilling through the external wall
- Installation of suitable isolation valves
- Secure fitting of the external tap connections
- Final testing and leak checks
Installation Approach
The internal water supplies were assessed before the new hot and cold pipework was routed to the external wall.
Openings were formed carefully for the new pipework, and the external taps were positioned to provide convenient access while maintaining a neat finish. The pipework was securely fixed and protected where required.
Suitable isolation and backflow protection were incorporated into the installation, allowing the external water supplies to be controlled safely and maintained when necessary.
Once the work was complete, all connections were thoroughly tested to confirm reliable flow and leak-free operation.
End Result
The completed installation provides convenient access to both hot and cold water outside the property.
The securely fitted taps, protected pipework and tested connections have created a practical and durable setup suitable for cleaning, gardening and other everyday outdoor tasks.
Need Hot and Cold Outside Taps Installed?
Heatworks installs hot, cold and combined outside water supplies throughout South Wales.
We can assess the existing plumbing, identify a suitable tap position and complete the required pipework, isolation and safety measures.
Gas Main Installation Project
This project involved installing a new gas main and external gas pipework to provide the property with a safe and reliable gas supply.
Gas pipework must be correctly sized, routed, supported and tested to ensure safe operation and dependable long-term performance. As part of our boiler and heating services, gas supply work is completed with careful attention to safety, accessibility and the requirements of the property.
Scope of Work
- Installation of new gas main pipework
- Routing of the pipework along the external wall
- Secure fixing and support of the gas pipe
- Connection to the existing gas supply
- Pressure testing and final safety checks
Installation Approach
The proposed pipe route was assessed before installation to ensure the gas main could be positioned safely while remaining accessible for inspection and future maintenance.
The external pipework was installed neatly and securely supported along the wall, with careful attention given to protecting it from accidental damage. All fittings and connections were completed correctly before the new gas main was connected to the existing supply.
Once the installation was complete, the pipework was thoroughly tested to confirm that the system was secure and operating safely.
End Result
The completed installation provides the property with a safe and dependable gas supply.
The securely supported pipework, carefully planned route and fully tested connections have created a neat and durable installation designed for reliable long-term use.
Need a Gas Main Installed or Upgraded?
Heatworks carries out gas main installations, gas supply alterations and associated heating work throughout South Wales.
We can assess the existing supply, plan a suitable pipe route and complete the required installation and safety testing.
Completed heating work including system installation, upgrades or repairs, carried out by qualified engineers.
Completed heating work including system installation, upgrades or repairs, carried out by qualified engineers
Loft Central Heating Installation Project
This project involved installing central heating pipework and associated system components within a loft space, requiring careful planning to create a neat, accessible and reliable installation.
Loft heating installations need to be designed correctly to ensure the pipework is securely supported, suitably protected and accessible for future inspection and maintenance. As part of our central heating installation services, each system is planned around the layout and heating requirements of the property.
Scope of Work
- Installation of central heating pipework within the loft space
- Careful routing and secure support of the pipework
- Connection to the existing heating system
- System adjustments and balancing
- Full testing and final performance checks
Installation Approach
The loft space and proposed pipe routes were assessed before installation began to ensure the new heating pipework could be positioned safely and practically.
The pipework was routed neatly through the loft, securely supported and arranged to maintain suitable access for future inspection and maintenance. Careful attention was given to the connections and overall layout so the new components could integrate correctly with the existing heating system.
This project was completed in Maesteg, within the Bridgend area. Homeowners planning similar work can learn more about our heating services in Bridgend.
Once the installation was complete, the heating system was filled, balanced and thoroughly tested to confirm consistent performance throughout the property.
End Result
The completed installation provides a neat and dependable central heating arrangement, with the new pipework correctly integrated into the existing system.
Careful routing, secure support and system balancing have created a practical setup designed for reliable long-term use.
Need Central Heating Work Carried Out?
Heatworks installs and upgrades central heating systems throughout Maesteg, Bridgend and the surrounding South Wales area.
We can assess your existing heating system, property layout and installation requirements before recommending the most suitable approach.
Contact Heatworks to discuss your central heating installation.
Central Heating Replacement Project
This project involved replacing an ageing central heating system with a modern, more efficient setup designed to provide reliable warmth and improved heat distribution throughout the property.
The existing system was no longer performing effectively, with ageing components and inconsistent heating across different rooms. As part of our central heating installation and replacement services, we redesigned the system around the requirements of the property.
Scope of Work
- Removal of the existing heating system
- Installation of a new boiler
- Installation of new radiators
- Upgrade of the heating pipework
- System balancing, testing and commissioning
Installation Approach
The replacement system was carefully planned to improve efficiency and provide more even heat distribution throughout the property.
New pipework was installed neatly, and the radiators were selected and positioned to suit the heating requirements of each room. The new boiler, radiators and controls were then configured to operate together as one balanced system.
This project was completed in Ogmore Vale, within the Bridgend area. Homeowners considering a similar upgrade can learn more about our boiler installation service in Bridgend.
Once the installation was complete, the system was balanced, fully tested and commissioned to confirm safe, reliable and consistent performance.
End Result
The completed system provides dependable heating, improved heat distribution and greater efficiency compared with the original installation.
Replacing the ageing boiler, radiators and pipework has created a modern central heating setup designed for reliable day-to-day use and long-term performance.
Need Your Central Heating System Replaced?
Heatworks carries out complete central heating replacements throughout Bridgend and the surrounding South Wales area.
We can assess your existing system, identify areas of poor performance and recommend a suitable replacement based on the heating requirements of your property.
Contact Heatworks to discuss your central heating replacement.
En Suite Bathroom Installation Project
This project involved the complete installation of an en suite bathroom, including removal of the existing fixtures, installation of new sanitaryware and completion of the associated plumbing and finishing work.
En suite bathrooms need to be planned carefully to make effective use of the available space while remaining practical, comfortable and easy to maintain. As part of our bathroom and en-suite installation services, each project is completed with long-term reliability, usability and appearance in mind.
Scope of Work
- Removal of the existing en-suite fixtures and fittings
- Installation of a new toilet, basin and shower or bath
- Alteration of the associated plumbing where required
- Installation of fixtures, fittings and finishing details
- Final testing and inspection of the completed installation
Installation Approach
The existing en suite was carefully stripped out before the new layout, sanitaryware positions and plumbing requirements were assessed.
The toilet, basin and bathing area were installed securely, with careful attention given to alignment, access and the efficient use of the available space. The associated water supply and waste connections were adjusted where required to suit the new arrangement.
Any necessary improvements to the property’s existing plumbing system were completed as part of the work to support reliable long-term performance.
Before handover, all fixtures, fittings and plumbing connections were thoroughly tested to confirm safe, reliable and leak-free operation.
End Result
The completed en suite provides a clean, modern and practical bathroom space designed for comfortable everyday use.
The new sanitaryware, updated plumbing and carefully completed finishing work have created a durable installation with a neat and professional finish.
Need an En Suite Bathroom Installed?
Heatworks carries out complete bathroom and en-suite installations throughout South Wales.
We can assist with removal of the existing suite, plumbing alterations, sanitaryware installation and completion of the associated work required to create a reliable finished space.
Contact Heatworks to discuss your en-suite bathroom installation.
Accessible Bathroom Installation Project
This project involved the complete installation of an accessible bathroom, including removal of the existing suite, installation of new fixtures and completion of the associated plumbing and finishing work.
Accessible bathrooms need to be planned around the needs of the person using the space, with careful attention given to layout, comfort, ease of movement and everyday usability. As part of our bathroom installation services, each project is completed with safety, accessibility and long-term reliability in mind.
Scope of Work
- Removal of the existing bathroom fixtures and fittings
- Installation of a new accessible bathroom suite
- Alteration of the associated plumbing where required
- Installation of fixtures, fittings and finishing details
- Final testing and inspection of the completed installation
Installation Approach
The existing bathroom was carefully stripped out before the new layout, fixture positions and plumbing requirements were assessed.
The replacement suite was installed securely, with careful attention given to access, ease of use and the practical arrangement of the available space. The associated water supply and waste connections were adjusted where required to suit the new installation.
Any necessary improvements to the property’s existing plumbing system were completed as part of the work to support dependable long-term performance.
Before handover, all fixtures, fittings and plumbing connections were thoroughly tested to confirm safe, reliable and leak-free operation.
End Result
The completed bathroom provides a clean, practical and accessible space designed to support comfortable day-to-day use.
The new suite, updated plumbing and carefully planned layout have created a reliable bathroom with usability and long-term performance at the centre of the installation.
Need an Accessible Bathroom Installed?
Heatworks carries out accessible bathroom installations throughout South Wales.
We can assess the existing room, discuss the user’s practical requirements and complete the plumbing and installation work needed to create a safer and easier-to-use bathroom.
Contact Heatworks to discuss your accessible bathroom installation.
Combi Boiler Replacement Project
This project involved replacing an ageing combi boiler with a modern, more efficient unit to improve heating reliability and provide dependable hot water throughout the property.
Combi boiler replacements need to be planned and completed correctly to ensure safe operation, suitable system setup and reliable day-to-day performance. As part of our boiler installation and replacement services, we assess the existing system before recommending a suitable replacement.
Scope of Work
- Removal of the existing combi boiler
- Installation of a new combi boiler
- Pipework and connection alterations where required
- System checks and safety testing
- Full testing and commissioning of the new boiler
Installation Approach
The existing boiler was removed carefully before the replacement unit was positioned and connected to the property’s heating and hot water system.
Any necessary pipework alterations were completed to ensure the new boiler was installed neatly and connected correctly. The controls and associated system components were also checked and configured to support efficient and reliable operation.
Once the installation was complete, the boiler and heating system were thoroughly tested and commissioned to confirm safe, consistent and dependable performance.
End Result
The completed replacement provides improved efficiency, reliable heating and consistent hot water throughout the property.
Replacing the ageing boiler has also reduced the risk of unexpected breakdowns and created a modern system designed for dependable long-term use.
If you are planning a similar replacement locally, learn more about our boiler installation service in Bridgend.
Need a Combi Boiler Replaced?
Heatworks carries out combi boiler replacements throughout Bridgend, Cardiff, Swansea, Neath, Port Talbot and the surrounding South Wales area.
We can assess your existing heating system, explain the available replacement options and recommend a suitable combi boiler for your property.
System Boiler Replacement Project
This project involved replacing an ageing system boiler with a modern, more efficient unit to improve heating reliability and overall system performance.
Older system boilers can become less efficient and increasingly unreliable over time, leading to inconsistent heating, higher running costs and a greater risk of breakdowns. As part of our boiler installation and replacement services, we assess the existing system before recommending a suitable replacement.
Scope of Work
- Removal of the existing system boiler
- Installation of a new system boiler
- Pipework alterations where required
- System checks and safety testing
- Full testing and commissioning of the new boiler
Installation Approach
The existing boiler was removed carefully before the replacement unit was positioned and connected to the property’s heating system.
Any necessary pipework alterations were completed to ensure the new boiler was installed neatly and connected correctly. The existing controls and associated system components were also checked and configured to support reliable day-to-day operation.
Once the installation was complete, the boiler and heating system were thoroughly tested and commissioned to confirm safe, efficient and consistent performance.
End Result
The completed replacement provides more dependable heating, improved efficiency and reliable performance throughout the property.
Replacing the ageing boiler has also reduced the risk of unexpected breakdowns and created a modern system designed for dependable long-term use.
Need a System Boiler Replaced?
Heatworks replaces system boilers throughout Bridgend, Cardiff, Swansea, Neath, Port Talbot and the surrounding South Wales area.
We can assess your existing heating system, explain the available replacement options and recommend a suitable system boiler for your property.
Contact Heatworks to discuss your system boiler replacement.
Commercial Cloakroom Installation Project
This project involved the refurbishment and installation of a commercial cloakroom, creating a clean, practical and durable washroom space suitable for regular use.
Commercial washrooms need to be planned and installed carefully to ensure reliable plumbing, straightforward maintenance and a professional finish. As part of our commercial plumbing services, we complete washroom installations with durability, accessibility and long-term performance in mind.
Scope of Work
- Removal of the existing fixtures where required
- Installation of toilets, basins and urinals
- Alteration of the associated plumbing and waste connections
- Installation of fixtures, fittings and finishing details
- Final testing and inspection of the completed work
Installation Approach
The existing cloakroom layout and plumbing arrangement were assessed before the new fixtures and services were installed.
Careful attention was given to the positioning of the toilets, basins and urinals to create a practical layout with suitable access for cleaning and future maintenance. The water supply and waste pipework were altered where required to suit the new installation.
All fixtures were installed securely, and the associated valves, connections and drainage were checked thoroughly before completion.
The completed installation was then tested to confirm reliable water flow, effective drainage and leak-free operation throughout the cloakroom.
End Result
The finished commercial cloakroom provides a clean, functional and professional washroom space designed to withstand regular use.
The secure fixtures, upgraded plumbing and carefully completed finishing work have created a durable installation that is straightforward to maintain.
Need a Commercial Washroom Installed or Refurbished?
Heatworks carries out commercial plumbing, cloakroom and washroom installation work throughout South Wales.
We can assist with fixture replacement, pipework alterations, drainage connections and complete commercial washroom refurbishments.
Contact Heatworks to discuss your commercial washroom project.
Cold Water Main Riser Installation Project
This project involved installing and altering cold water main riser pipework to improve the water supply arrangement within the property.
Cold water risers must be planned and installed correctly to provide reliable flow, maintain suitable pressure and support the property’s wider plumbing system. As part of our professional plumbing services, we install and upgrade water supply pipework with long-term reliability and ease of maintenance in mind.
Scope of Work
- Installation and alteration of cold water main riser pipework
- Adjustments to the existing water supply connections
- Associated plumbing alterations where required
- Pressure testing and system checks
- Final inspection of the completed installation
Installation Approach
The existing water supply arrangement was assessed before the new riser pipework was routed and installed to suit the layout of the property.
Careful attention was given to the positioning of the pipework, joints and connections to create a neat and dependable installation while maintaining practical access for future inspection and maintenance.
All connections were checked thoroughly before the completed system was pressure tested to confirm reliable flow and leak-free operation.
End Result
The completed installation provides a dependable cold water supply arrangement with neatly routed pipework and secure connections throughout.
The upgraded riser system is designed to support reliable day-to-day operation and provide a durable foundation for the property’s wider plumbing services.
Need Cold Water Pipework Installed or Upgraded?
Heatworks carries out cold water main, riser pipework and general plumbing installations throughout South Wales.
We can assess your existing water supply, identify any necessary alterations and recommend a practical solution for your property.
Regular Boiler Replacement Project
This project involved replacing an ageing regular boiler with a modern, more efficient unit to improve heating reliability and overall system performance.
Older boilers can become less efficient and increasingly unreliable over time, leading to inconsistent heating, higher running costs and an increased risk of breakdowns. As part of our boiler installation and replacement services, we assess the existing system before recommending a suitable replacement.
Scope of Work
- Removal of the existing regular boiler
- Installation of a new regular boiler
- Pipework alterations where required
- System checks and safety testing
- Full commissioning of the new boiler
Installation Approach
The existing boiler was removed carefully before the replacement unit was positioned and connected to the property’s existing heating and hot water system.
The new boiler was installed neatly, with the relevant pipework and controls checked to ensure dependable day-to-day operation.
This project was completed in Neath. Homeowners considering a similar replacement can learn more about our boiler installation service in Neath.
Once the installation was complete, the boiler and heating system were fully tested and commissioned to confirm safe, reliable and consistent performance.
End Result
The completed replacement provides more reliable heating, improved efficiency and dependable hot water performance throughout the property.
Replacing the ageing boiler has also reduced the likelihood of unexpected breakdowns and provided the homeowner with a modern system designed for long-term use.
Need a Regular Boiler Replaced?
Heatworks replaces regular, system and combi boilers throughout Neath and the surrounding South Wales area.
We can assess your existing heating system, explain the available replacement options and recommend a suitable boiler for your property.
Open Vent Boiler Replacement Project
This project involved replacing an ageing open vent boiler with a modern, more efficient unit to improve heating reliability and overall system performance.
Older open vent boiler systems can become increasingly inefficient and unreliable over time, affecting heating output, hot water performance and day-to-day dependability. As part of our boiler installation and replacement services, we assess the existing system before recommending a suitable replacement.
Scope of Work
- Removal of the existing open vent boiler
- Installation of a new replacement boiler
- Pipework alterations where required
- System checks and safety testing
- Full testing and commissioning of the new boiler
Installation Approach
The existing boiler was removed carefully before the new unit was positioned and connected to the property’s existing heating and hot water system.
Any necessary pipework alterations were completed to ensure the replacement boiler was connected correctly and installed neatly. The existing controls and associated system components were also checked as part of the installation.
Once the replacement was complete, the boiler and heating system were fully tested and commissioned to confirm safe, reliable and consistent operation.
End Result
The completed installation provides more dependable heating, improved efficiency and reliable hot water performance throughout the property.
Replacing the ageing boiler has also reduced the risk of unexpected breakdowns and provided the homeowner with a modern system designed for long-term day-to-day use.
Need an Open Vent Boiler Replaced?
Heatworks replaces open vent, regular, system and combi boilers throughout Bridgend, Cardiff, Swansea, Neath, Port Talbot and the surrounding South Wales area.
We can assess your existing heating system, explain the available replacement options and recommend a suitable boiler for your property.
Combi Boiler Replacement Project
This project involved replacing an ageing combi boiler with a modern, more efficient unit to improve heating reliability and provide dependable hot water throughout the property.
A combi boiler replacement must be completed correctly to ensure safe operation, consistent performance and efficient day-to-day use. As part of our boiler installation and replacement services, we assess the existing system before recommending a suitable replacement.
Scope of Work
- Removal of the existing combi boiler
- Installation of a new combi boiler
- Pipework alterations where required
- System checks and safety testing
- Full testing and commissioning of the new boiler
Installation Approach
The existing boiler was removed carefully before the replacement unit was positioned and connected to the property’s heating and hot water system.
Any necessary pipework alterations were completed to ensure the new boiler was installed neatly and connected correctly. The controls and associated system components were also checked to confirm they were operating as intended.
This project was completed in Port Talbot. Homeowners considering a similar upgrade can learn more about our boiler installation service in Port Talbot.
Once the installation was complete, the boiler and heating system were fully tested and commissioned to confirm safe, reliable and consistent performance.
End Result
The completed installation provides more dependable heating, improved efficiency and consistent hot water throughout the property.
Replacing the ageing boiler has also reduced the risk of unexpected breakdowns and provided the homeowner with a modern system designed for reliable long-term use.
Need a Combi Boiler Replaced?
Heatworks carries out combi boiler replacements throughout Port Talbot and the surrounding South Wales area.
We can assess your existing heating system, explain the available replacement options and recommend a suitable combi boiler for your property.
Combi Boiler Installation in a Loft
This project involved installing a new combi boiler within a loft space, creating a practical heating and hot water system while making efficient use of the available space.
Loft boiler installations require careful planning to ensure the boiler, flue, pipework and controls are positioned safely and remain accessible for future servicing and maintenance. As part of our boiler installation services, each system is designed around the layout and requirements of the property.
Scope of Work
- Installation of a new combi boiler within the loft space
- Pipework connections and alterations where required
- Installation and positioning of the boiler flue
- System checks and safety testing
- Full testing and commissioning of the new boiler
Installation Approach
The boiler was carefully positioned within the loft to create a neat and practical installation while maintaining suitable access for inspection, servicing and future maintenance.
The heating, hot water and gas pipework was installed and connected to suit the property layout. Careful attention was given to the routing and protection of the pipework, together with the safe positioning of the flue and associated controls.
Once the installation was complete, the boiler and heating system were thoroughly tested and commissioned to confirm safe, reliable and consistent operation.
End Result
The completed installation provides dependable heating and hot water while keeping the boiler neatly contained within the loft space.
The carefully planned layout has also freed up usable space elsewhere in the property and created a practical system designed for reliable long-term use.
Need a Combi Boiler Installed in a Loft?
Heatworks installs combi boilers throughout South Wales, including loft installations where the available space and access are suitable.
We can assess your existing heating system, loft space, access requirements and proposed flue position before recommending the most appropriate installation arrangement.
Contact Heatworks to discuss your combi boiler installation.
Combi Boiler Installation in Nantymoel
This project in Nantymoel involved installing a new combi boiler to provide the property with a modern, efficient and practical heating and hot water system.
A combi boiler installation must be planned and completed correctly to ensure safe operation, reliable hot water and consistent heating throughout the property. As part of our boiler installation services, we assess the existing system and property requirements before installing the new unit.
Scope of Work
- Installation of a new combi boiler
- Pipework connections and alterations where required
- Installation and positioning of the boiler flue
- System checks and safety testing
- Full testing and commissioning of the new boiler
Installation Approach
The new boiler was carefully positioned and connected to the property’s heating and hot water system.
Any necessary pipework alterations were completed to create a neat and reliable installation, while the flue was installed in a suitable position to ensure safe operation. The controls and associated system components were also checked and configured correctly.
This project was completed in Nantymoel, near Bridgend. Homeowners considering a similar upgrade can learn more about our boiler installation service in Bridgend.
Once the installation was complete, the boiler and heating system were thoroughly tested and commissioned to confirm safe, efficient and dependable performance.
End Result
The completed installation provides reliable heating, consistent hot water and improved day-to-day efficiency for the property.
The new combi boiler has created a compact and practical system designed for dependable long-term use.
Need a Combi Boiler Installed?
Heatworks installs combi boilers throughout Nantymoel, Bridgend and the surrounding South Wales area.
We can assess your existing heating system, hot water requirements and available installation space before recommending a suitable boiler for your property.
Contact Heatworks to discuss your combi boiler installation.
Combi Boiler Relocation Project
This project involved relocating an existing combi boiler to a more suitable position within the property to improve access, room layout and overall practicality.
Boiler relocations require careful planning to ensure the new position is suitable for the appliance, flue, condensate drainage and associated pipework. As part of our boiler installation and relocation services, all work is completed with safety, accessibility and long-term reliability in mind.
Scope of Work
- Removal of the existing combi boiler from its original position
- Relocation and secure installation of the boiler
- Alteration and reconnection of the associated pipework
- Flue and condensate adjustments where required
- System checks, testing and full commissioning
Installation Approach
The existing boiler position and proposed new location were assessed before work began to ensure the appliance could be relocated safely and remain accessible for future servicing and maintenance.
The boiler was removed carefully before the heating, hot water, gas and condensate connections were extended or altered to suit the new position. The flue arrangement was also adapted where required to ensure safe operation.
Once the boiler had been securely installed in its new location, all pipework and connections were checked thoroughly. The complete system was then tested and commissioned to confirm safe, reliable and consistent performance.
End Result
The completed relocation provides a cleaner and more practical boiler position while maintaining dependable heating and hot water performance.
The new location has improved the use of space within the property and created a more accessible installation for future servicing and maintenance.
Need a Combi Boiler Relocated?
Heatworks carries out combi boiler relocations throughout South Wales.
We can assess the existing boiler position, proposed new location, flue route and required pipework alterations before confirming whether the relocation is practical.
System Boiler and Unvented Cylinder Installation Project
This project involved installing a new system boiler and unvented hot water cylinder to provide reliable heating and strong hot water performance throughout the property.
System boiler and cylinder installations need to be designed correctly around the property’s heating requirements, hot water demand and available installation space. As part of our boiler installation services and unvented hot water cylinder installations, each system is planned with safety, efficiency and long-term reliability in mind.
Scope of Work
- Installation of a new system boiler
- Installation of an unvented hot water cylinder
- Pipework connections and alterations where required
- Installation of the relevant controls and safety components
- Full testing and commissioning of the heating and hot water system
Installation Approach
The boiler and cylinder were carefully positioned and configured to suit the property layout and expected demand for heating and hot water.
The associated pipework, controls and safety components were installed and connected so the boiler and cylinder could operate together as one complete system. Careful attention was given to the arrangement of the pipework and the accessibility of the equipment for future servicing and maintenance.
Once the installation was complete, all controls, connections and safety devices were checked thoroughly. The complete heating and hot water system was then tested and commissioned to confirm safe, reliable and consistent operation.
End Result
The completed installation provides dependable heating and strong hot water performance across multiple outlets.
The system boiler, unvented cylinder, controls and associated pipework have been configured to create an efficient and practical setup designed for reliable long-term use.
Need a System Boiler and Unvented Cylinder Installed?
Heatworks installs system boilers and unvented hot water cylinders throughout South Wales.
We can assess your property’s heating requirements, hot water demand and available installation space before recommending a suitable boiler and cylinder combination.
Contact Heatworks to discuss your boiler and cylinder installation.
System Boiler and Cylinder Installation in a Loft
This project involved installing a new system boiler and hot water cylinder within a loft space, creating a practical heating and hot water system while making effective use of the available space.
Loft installations require careful planning to ensure the boiler, cylinder, pipework and controls are positioned safely, adequately supported and accessible for future servicing and maintenance. As part of our boiler installation services and hot water cylinder installations, each system is designed around the requirements of the property.
Scope of Work
- Installation of a new system boiler within the loft space
- Installation of a new hot water cylinder
- Pipework connections and alterations where required
- Installation of the relevant controls and safety components
- Full testing and commissioning of the heating and hot water system
Installation Approach
The boiler and cylinder were carefully positioned within the loft to make efficient use of the available space while maintaining suitable access for inspection, servicing and future maintenance.
The heating and hot water pipework was installed and connected to suit the layout of the property. Careful attention was given to the support, routing and protection of the pipework, together with the positioning of the controls and associated safety components.
This project was completed in Bridgend. Homeowners considering a similar installation can learn more about our boiler installation service in Bridgend.
Once the installation was complete, the boiler, cylinder and associated system components were thoroughly tested and commissioned to confirm safe, reliable and consistent operation.
End Result
The completed installation provides dependable heating and strong hot water performance while keeping the main system equipment neatly contained within the loft.
The boiler, cylinder, controls and pipework have been configured to create a practical and efficient system designed for reliable long-term use.
Need a Boiler and Cylinder Installed?
Heatworks installs system boilers and hot water cylinders throughout Bridgend and the surrounding South Wales area, including loft installations where the available space is suitable.
We can assess your heating requirements, hot water demand and proposed installation area before recommending the most appropriate boiler and cylinder arrangement.
Contact Heatworks to discuss your boiler and cylinder installation.
System Boiler and Cylinder Installation in a Garage
This project involved installing a new system boiler and hot water cylinder within a garage, creating a practical heating and hot water setup while making effective use of the available space.
Garage installations require careful planning to ensure the boiler, cylinder, pipework and controls are positioned safely, remain accessible for servicing and are protected against unsuitable conditions. As part of our boiler installation services and hot water cylinder installations, each system is designed around the requirements of the property.
Scope of Work
- Installation of a new system boiler within the garage
- Installation of a new hot water cylinder
- Pipework connections and alterations where required
- Installation of the relevant controls and safety components
- Full testing and commissioning of the heating and hot water system
Installation Approach
The boiler and cylinder were carefully positioned within the garage to make good use of the available space while maintaining suitable access for servicing, inspection and future maintenance.
The heating and hot water pipework was installed and connected to suit the layout of the property. Careful attention was given to the arrangement of the controls, safety components and associated connections so the boiler and cylinder could operate together as one complete system.
All pipework and components were checked thoroughly before the system was filled, tested and commissioned to confirm safe, reliable and consistent operation.
End Result
The completed installation provides dependable heating and strong hot water performance while keeping the main system equipment neatly contained within the garage.
The boiler, cylinder, controls and pipework have been configured to create an efficient and practical setup designed for reliable long-term use.
Need a Boiler and Cylinder Installed?
Heatworks installs system boilers and hot water cylinders throughout South Wales, including garage installations where the available space is suitable.
We can assess your heating requirements, hot water demand and proposed installation area before recommending the most appropriate boiler and cylinder arrangement.
Contact Heatworks to discuss your boiler and cylinder installation.
Showcase Boiler and Cylinder Installation in a Loft
This project involved installing a new boiler and hot water cylinder within a loft space, creating a neat and efficient heating and hot water system while making effective use of the available space.
Loft installations require careful planning to ensure the boiler, cylinder, pipework and controls are positioned safely, adequately supported and accessible for future servicing and maintenance. As part of our boiler installation services and hot water cylinder installations, each system is designed around the requirements of the property.
Scope of Work
- Installation of a new boiler within the loft space
- Installation of a new hot water cylinder
- Pipework connections and alterations where required
- Installation of the relevant controls and safety components
- Full testing and commissioning of the heating and hot water system
Installation Approach
The boiler and cylinder were carefully positioned within the loft to create a clean and practical layout while maintaining suitable access for inspection, servicing and future maintenance.
The heating and hot water pipework was installed and connected to suit the layout of the property. Careful attention was given to the support, routing and protection of the pipework, together with the positioning of the controls and associated safety components.
This project was completed in Bridgend. Homeowners considering a similar installation can learn more about our boiler installation service in Bridgend.
Once the installation was complete, the boiler, cylinder and associated system components were thoroughly tested and commissioned to confirm safe, reliable and consistent operation.
End Result
The completed installation provides dependable heating and strong hot water performance while keeping the main system equipment neatly contained within the loft.
The carefully planned layout, protected pipework and accessible equipment have created a tidy and practical installation designed for reliable long-term use.
Need a Boiler and Cylinder Installed?
Heatworks installs boilers and hot water cylinders throughout Bridgend and the surrounding South Wales area, including loft installations where the available space is suitable.
We can assess your heating requirements, hot water demand and proposed installation area before recommending the most appropriate boiler and cylinder arrangement.
Contact Heatworks to discuss your boiler and cylinder installation.
System Boiler Installation Project
This project involved installing a new system boiler to provide the property with a reliable and efficient central heating setup.
A system boiler installation needs to be planned and completed correctly to ensure safe operation, suitable control of the heating system and dependable day-to-day performance. As part of our boiler installation services, each system is designed around the requirements and layout of the property.
Scope of Work
- Installation of a new system boiler
- Pipework connections and alterations where required
- Installation and configuration of the relevant controls
- System checks and safety testing
- Full testing and commissioning of the new boiler
Installation Approach
The new boiler was carefully positioned and connected to suit the property’s existing heating system and installation layout.
Any necessary pipework alterations were completed to create a neat and dependable installation. The associated controls and system components were also checked and configured to ensure the boiler operated correctly as part of the wider heating system.
Once the installation was complete, the boiler and central heating system were thoroughly tested and commissioned to confirm safe, reliable and consistent operation.
End Result
The completed installation provides dependable heating, improved efficiency and a modern system setup designed for reliable everyday use.
The new system boiler, controls and associated pipework have been configured to create a practical and efficient installation with long-term performance in mind.
Need a System Boiler Installed?
Heatworks installs system boilers throughout South Wales.
We can assess your existing heating system, property requirements and available installation space before recommending a suitable replacement or new boiler installation.
Contact Heatworks to discuss your system boiler installation.
System Boiler and uniSTOR Cylinder Installation Project
This project involved the installation of a system boiler paired with a Vaillant uniSTOR unvented hot water cylinder, providing strong water pressure and reliable heating performance throughout the property.
Unvented cylinder systems must be designed and installed correctly to ensure safe operation, consistent water pressure and efficient performance across multiple outlets. As part of our boiler installation services and hot water cylinder installations, we design each system around the property’s heating and hot water requirements.
Scope of Work
- Installation of a new system boiler
- Installation of a Vaillant uniSTOR unvented cylinder
- Hot and cold water connections
- Installation of safety components and discharge pipework
- System checks and full commissioning
Installation Approach
The boiler and cylinder were installed and configured to meet the property’s demand for heating and hot water, providing consistent pressure and reliable performance across multiple outlets.
This installation was completed in Neath, with the boiler, cylinder, controls, safety devices and connecting pipework designed to operate together as one complete system.
Homeowners planning a similar upgrade can learn more about our boiler installation service in Neath.
All components were installed in accordance with current requirements, and the complete system was thoroughly tested and commissioned before handover.
End Result
The completed installation provides strong and consistent hot water across multiple outlets, together with efficient and dependable heating throughout the property.
The system boiler and uniSTOR cylinder were correctly matched to the property’s requirements, creating a balanced setup designed for safe, reliable and long-term performance.
Need a Boiler and Cylinder Installed?
Heatworks installs system boilers and unvented hot water cylinders throughout Neath and the surrounding South Wales area.
We can assess your property’s heating requirements, hot water demand and available installation space before recommending the most suitable boiler and cylinder combination.
Contact Heatworks to discuss your boiler and cylinder installation.
New Bathroom Installation Project
This project involved the complete installation of a new bathroom, including first fix plumbing, sanitaryware installation, water and waste connections, and final testing.
A bathroom installation needs to be planned and completed correctly from the initial pipework stage through to final fitting. The layout, water supplies, drainage and fixture positions all affect how reliably and practically the room performs. As part of our bathroom installation services, every stage is completed with long-term usability and dependable performance in mind.
Scope of Work
- Installation of first fix bathroom pipework
- Installation of the bath, shower, basin and toilet
- Hot and cold water supply connections
- Waste and drainage connections
- Second fix installation and final testing
Installation Approach
The bathroom layout was assessed before the new water supply and waste pipework was positioned to suit the sanitaryware and available space.
The bath, shower, basin and toilet were installed securely, with careful attention given to alignment, access and the positioning of the associated plumbing connections.
Where required, alterations and improvements were made to the property’s existing plumbing system to support the new installation and provide reliable long-term operation.
Before completion, all fixtures, valves, water connections and drainage points were thoroughly tested to confirm safe, reliable and leak-free performance.
End Result
The completed bathroom provides a clean, practical and modern space with dependable plumbing and securely installed fixtures throughout.
Careful planning of the pipework, sanitaryware and drainage has created a reliable installation designed for comfortable everyday use.
Need a New Bathroom Installed?
Heatworks carries out complete bathroom installations throughout South Wales.
We can assist with first fix plumbing, sanitaryware installation, pipework alterations, drainage connections and final testing from the beginning of the project through to completion.
Modern Bathroom Installation Project
This project involved the complete renovation of a bathroom, including removal of the existing fixtures, installation of a new suite and completion of the associated plumbing and finishing work.
A modern bathroom needs to combine a practical layout, dependable plumbing and a clean finished appearance. As part of our bathroom installation services, each project is planned around the available space, everyday usability and long-term reliability.
Scope of Work
- Removal of the existing bathroom fixtures and fittings
- Installation of a new bath, shower, basin and toilet
- Alteration of the associated plumbing where required
- Installation of fixtures, fittings and finishing details
- Final testing and inspection of the completed installation
Installation Approach
The existing bathroom was carefully stripped out before the new layout, sanitaryware positions and plumbing requirements were assessed.
The bath, shower, basin and toilet were installed securely, with careful attention given to alignment, access and the efficient use of the available space. The associated water supply and waste connections were adjusted where required to suit the new arrangement.
Any necessary improvements to the property’s existing plumbing system were completed as part of the work to support dependable long-term performance.
Before handover, all fixtures, fittings and plumbing connections were thoroughly tested to confirm safe, reliable and leak-free operation.
End Result
The completed bathroom provides a clean, modern and practical space designed for comfortable everyday use.
The new sanitaryware, updated plumbing and carefully completed finishing work have created a durable installation with a neat and contemporary finish.
Need a Modern Bathroom Installed?
Heatworks carries out complete bathroom installations throughout South Wales.
We can assist with removal of the existing suite, plumbing alterations, installation of new sanitaryware and completion of the associated work required to create a reliable finished space.
White and Blue Shower Room Installation Project
This project involved the complete renovation of a shower room, including removal of the existing fixtures, installation of a new suite and completion of the associated plumbing and finishing work.
The finished design combines clean white fittings with blue feature details to create a bright, practical and distinctive space. As part of our bathroom and shower room installation services, each project is planned around the available space, everyday usability and long-term reliability.
Scope of Work
- Removal of the existing bathroom fixtures and fittings
- Installation of a new shower, basin and toilet
- Alteration of the associated plumbing where required
- Installation of fixtures, fittings and finishing details
- Final testing and inspection of the completed installation
Installation Approach
The existing shower room was carefully stripped out before the new layout, fixture positions and plumbing requirements were assessed.
The shower, basin and toilet were installed securely, with careful attention given to alignment, access and the efficient use of the available space. The associated water supply and waste connections were adjusted where required to suit the new arrangement.
Any necessary improvements to the property’s existing plumbing system were completed as part of the work to support dependable long-term performance.
Before handover, all fixtures, fittings and plumbing connections were thoroughly tested to confirm safe, reliable and leak-free operation.
End Result
The completed shower room provides a modern, practical and attractive space with clean white fittings and distinctive blue feature details.
The new fixtures, updated plumbing and carefully completed finishing work have created a durable room designed for comfortable everyday use.
Need a Shower Room Installed?
Heatworks carries out complete bathroom and shower room installations throughout South Wales.
We can assist with removal of the existing suite, plumbing alterations, installation of new fixtures and completion of the associated work required to create a reliable finished space.
Contemporary Bathroom Installation Project
This project involved the complete renovation of a bathroom, including removal of the existing fixtures, installation of a new suite and completion of the associated plumbing and finishing work.
A contemporary bathroom needs to combine clean design, practical use and reliable installation. As part of our bathroom installation services, each project is planned around the available space, everyday usability and long-term performance.
Scope of Work
- Removal of the existing bathroom fixtures and fittings
- Installation of a new bath, shower, basin and toilet
- Alteration of the associated plumbing where required
- Installation of fixtures, fittings and finishing details
- Final testing and inspection of the completed installation
Installation Approach
The existing bathroom was carefully stripped out before the new layout, sanitaryware positions and plumbing requirements were assessed.
The bath, shower, basin and toilet were installed securely, with careful attention given to alignment, access and the efficient use of the available space. The associated water supply and waste connections were adjusted where required to suit the new arrangement.
Any necessary improvements to the property’s existing plumbing system were completed as part of the work to support dependable long-term performance.
Before handover, all fixtures, fittings and plumbing connections were thoroughly tested to confirm safe, reliable and leak-free operation.
End Result
The completed bathroom provides a clean, modern and practical space with a contemporary finish.
The new sanitaryware, updated plumbing and carefully completed finishing work have created a durable room designed for comfortable everyday use.
Need a Contemporary Bathroom Installed?
Heatworks carries out complete bathroom installations throughout South Wales.
We can assist with removal of the existing suite, plumbing alterations, installation of new sanitaryware and completion of the associated work required to create a reliable finished space.
Green Shower Room Project
This project involved the complete renovation of a shower room, including removal of the existing fixtures, installation of a new suite and completion of the associated plumbing and finishing work.
The design uses green feature details to create a distinctive, practical space with a clean and modern finish. As part of our bathroom and shower room installation services, each project is planned around the available space, the needs of the household and long-term everyday use.
Scope of Work
- Removal of the existing bathroom fixtures and fittings
- Installation of a new shower, basin and toilet
- Alteration of the associated plumbing where required
- Installation of fixtures, fittings and finishing details
- Final testing and inspection of the completed installation
Installation Approach
The existing shower room was carefully stripped out before the plumbing layout and positioning of the new fixtures were assessed.
The shower, basin and toilet were installed securely, with the pipework adjusted where required to suit the new layout. Careful attention was given to alignment, access and finishing details to create a neat and practical result.
Any necessary upgrades to the property’s existing plumbing system were completed as part of the work to support reliable long-term performance.
Before handover, all fixtures, fittings and connections were thoroughly tested to confirm safe, reliable and leak-free operation.
End Result
The completed shower room provides a modern, practical and attractive space with a distinctive green finish.
The new fixtures, upgraded plumbing and carefully completed finishing work have created a durable room designed for comfortable everyday use.
Need a Shower Room Installed?
Heatworks carries out complete bathroom and shower room installations throughout South Wales.
We can assist with the removal of the existing suite, plumbing alterations, installation of new fixtures and completion of the associated finishing work.
Metro Bathroom Installation Project
This project involved the complete renovation of a bathroom, including removal of the existing fixtures, installation of a new suite and completion of the associated plumbing and finishing work.
The metro-style design creates a clean, modern and practical space with a simple, timeless finish. As part of our bathroom installation services, each project is planned around the available space, everyday usability and long-term reliability.
Scope of Work
- Removal of the existing bathroom fixtures and fittings
- Installation of a new bath, shower, basin and toilet
- Alteration of the associated plumbing where required
- Installation of fixtures, fittings and finishing details
- Final testing and inspection of the completed installation
Installation Approach
The existing bathroom was carefully stripped out before the new layout, sanitaryware positions and plumbing requirements were assessed.
The bath, shower, basin and toilet were installed securely, with careful attention given to alignment, access and the efficient use of the available space. The associated water supply and waste connections were adjusted where required to suit the new arrangement.
Any necessary improvements to the property’s existing plumbing system were completed as part of the work to support dependable long-term performance.
Before handover, all fixtures, fittings and plumbing connections were thoroughly tested to confirm safe, reliable and leak-free operation.
End Result
The completed bathroom provides a modern, practical and reliable space with a clean metro-style finish.
The new sanitaryware, updated plumbing and carefully completed finishing work have created a durable room designed for comfortable everyday use.
Need a Bathroom Installed?
Heatworks carries out complete bathroom installations throughout South Wales.
We can assist with removal of the existing suite, plumbing alterations, installation of new sanitaryware and completion of the associated work required to create a reliable finished space.
White En Suite Installation Project
This project involved the complete refurbishment of an en suite, including removal of the existing fixtures, installation of a new suite and completion of the associated plumbing and finishing work.
The finished design uses a simple all-white scheme to create a bright, clean and practical space. As part of our bathroom and en-suite installation services, each project is planned around the available space, everyday usability and long-term reliability.
Scope of Work
- Removal of the existing en-suite fixtures and fittings
- Installation of a new shower, basin and toilet
- Alteration of the associated plumbing where required
- Installation of fixtures, fittings and finishing details
- Final testing and inspection of the completed installation
Installation Approach
The existing en suite was carefully stripped out before the plumbing layout and positioning of the new fixtures were assessed.
The shower, basin and toilet were installed securely, with careful attention given to alignment, access and the efficient use of the available space. The associated water supply and waste connections were adjusted where required to suit the new layout.
Any necessary improvements to the property’s existing plumbing system were completed as part of the work to support dependable long-term performance.
Before handover, all fixtures, fittings and plumbing connections were thoroughly tested to confirm safe, reliable and leak-free operation.
End Result
The completed en suite provides a bright, modern and practical space with a clean all-white finish.
The new fixtures, updated plumbing and carefully completed finishing work have created a durable room designed for comfortable everyday use.
Need an En Suite Installed?
Heatworks carries out complete bathroom and en-suite installations throughout South Wales.
We can assist with removal of the existing suite, plumbing alterations, installation of new fixtures and completion of the associated work required to create a reliable finished space.
Black and White En Suite Installation Project
This project involved the complete renovation of an en suite, including removal of the existing fixtures, installation of a new suite and completion of the associated plumbing and finishing work.
The black and white design creates a bold, modern and practical space with a clean, contrasting finish. As part of our bathroom and en-suite installation services, each project is planned around the available space, everyday usability and long-term reliability.
Scope of Work
- Removal of the existing en-suite fixtures and fittings
- Installation of a new shower, basin and toilet
- Alteration of the associated plumbing where required
- Installation of fixtures, fittings and finishing details
- Final testing and inspection of the completed installation
Installation Approach
The existing en suite was carefully stripped out before the new layout, fixture positions and plumbing requirements were assessed.
The shower, basin and toilet were installed securely, with careful attention given to alignment, access and the efficient use of the available space. The associated water supply and waste connections were adjusted where required to suit the new arrangement.
Any necessary improvements to the property’s existing plumbing system were completed as part of the work to support dependable long-term performance.
Before handover, all fixtures, fittings and plumbing connections were thoroughly tested to confirm safe, reliable and leak-free operation.
End Result
The completed en suite provides a bold, modern and practical space with a clean black and white finish.
The new fixtures, updated plumbing and carefully completed finishing work have created a durable room designed for comfortable everyday use.
Need an En Suite Installed?
Heatworks carries out complete bathroom and en-suite installations throughout South Wales.
We can assist with removal of the existing suite, plumbing alterations, installation of new fixtures and completion of the associated work required to create a reliable finished space.
Blue Bathroom Installation Project
This project involved the complete renovation of a bathroom, including removal of the existing fixtures, installation of a new suite and completion of the associated plumbing and finishing work.
The blue feature details create a distinctive, modern and practical space with a clean finish. As part of our bathroom installation services, each project is planned around the available space, everyday usability and long-term reliability.
Scope of Work
- Removal of the existing bathroom fixtures and fittings
- Installation of a new bath, shower, basin and toilet
- Alteration of the associated plumbing where required
- Installation of fixtures, fittings and finishing details
- Final testing and inspection of the completed installation
Installation Approach
The existing bathroom was carefully stripped out before the new layout, sanitaryware positions and plumbing requirements were assessed.
The bath, shower, basin and toilet were installed securely, with careful attention given to alignment, access and the efficient use of the available space. The associated water supply and waste connections were adjusted where required to suit the new arrangement.
Any necessary improvements to the property’s existing plumbing system were completed as part of the work to support dependable long-term performance.
Before handover, all fixtures, fittings and plumbing connections were thoroughly tested to confirm safe, reliable and leak-free operation.
End Result
The completed bathroom provides a modern, practical and attractive space with distinctive blue feature details.
The new sanitaryware, updated plumbing and carefully completed finishing work have created a durable room designed for comfortable everyday use.
Need a Bathroom Installed?
Heatworks carries out complete bathroom installations throughout South Wales.
We can assist with removal of the existing suite, plumbing alterations, installation of new sanitaryware and completion of the associated work required to create a reliable finished space.
Marble Shower Room Installation Project
This project involved the complete renovation of a shower room, including removal of the existing fixtures, installation of a new suite and completion of the associated plumbing and finishing work.
The marble-style design creates a clean, modern and practical space with a bright, high-quality finish. As part of our bathroom and shower room installation services, each project is planned around the available space, everyday usability and long-term reliability.
Scope of Work
- Removal of the existing bathroom fixtures and fittings
- Installation of a new shower, basin and toilet
- Alteration of the associated plumbing where required
- Installation of fixtures, fittings and finishing details
- Final testing and inspection of the completed installation
Installation Approach
The existing shower room was carefully stripped out before the plumbing layout and positioning of the new fixtures were assessed.
The shower, basin and toilet were installed securely, with careful attention given to alignment, access and the efficient use of the available space. The associated water supply and waste connections were adjusted where required to suit the new arrangement.
Any necessary improvements to the property’s existing plumbing system were completed as part of the work to support reliable long-term performance.
Before handover, all fixtures, fittings and plumbing connections were thoroughly tested to confirm safe, reliable and leak-free operation.
End Result
The completed shower room provides a modern, practical and attractive space with a clean marble-style finish.
The new fixtures, updated plumbing and carefully completed finishing work have created a durable room designed for comfortable everyday use.
Need a Shower Room Installed?
Heatworks carries out complete bathroom and shower room installations throughout South Wales.
We can assist with removal of the existing suite, plumbing alterations, installation of new fixtures and completion of the associated work required to create a reliable finished space.
Terrazzo Bathroom Refurbishment Project
This project involved the complete refurbishment of a bathroom and cloakroom, including removal of the existing fixtures, installation of new sanitaryware and completion of the associated plumbing and finishing work.
The terrazzo-style design creates a modern, distinctive and practical space with a clean finish. As part of our bathroom installation and refurbishment services, each project is planned around the available space, everyday usability and long-term reliability.
Scope of Work
- Removal of the existing bathroom fixtures and fittings
- Bathroom and cloakroom refurbishment work
- Installation of a new bath, shower, basin and toilet
- Alteration of the associated plumbing where required
- Installation of fixtures, fittings and finishing details
- Final testing and inspection of the completed installation
Installation Approach
The existing bathroom and cloakroom were carefully stripped out before the new layout, sanitaryware positions and plumbing requirements were assessed.
The bath, shower, basin and toilet were installed securely, with careful attention given to alignment, access and the efficient use of the available space. The associated water supply and waste connections were adjusted where required to suit the new arrangement.
Any necessary improvements to the property’s existing plumbing system were completed as part of the refurbishment to support dependable long-term performance.
Before handover, all fixtures, fittings and plumbing connections were thoroughly tested to confirm safe, reliable and leak-free operation.
End Result
The completed refurbishment provides a modern, practical and attractive bathroom with a distinctive terrazzo-style finish.
The new sanitaryware, updated plumbing and carefully completed finishing work have created a durable space designed for comfortable everyday use.
Need a Bathroom Refurbished?
Heatworks carries out complete bathroom and cloakroom refurbishments throughout South Wales.
We can assist with removal of the existing suite, plumbing alterations, installation of new sanitaryware and completion of the associated work required to create a reliable finished space.
Designer Radiator Remedial Work Project
This project involved correcting a dangerous designer radiator installation. The existing radiators were removed, the supporting wall structure was reinforced where required, and the units were reinstalled using secure and appropriate fixings.
Designer radiators can be considerably heavier than standard panel radiators, placing greater demand on the wall and mounting points. They must be installed correctly to ensure long-term safety, stability and reliable heating performance. As part of our central heating services, we carry out radiator installation, replacement and remedial work with safety and durability in mind.
Scope of Work
- Careful removal of the dangerously mounted designer radiators
- Inspection of the existing wall and fixing points
- Reinforcement of the supporting wall structure where required
- Secure reinstallation of the designer radiators
- Inspection of the associated valves and pipework
- Final safety and operational checks
Installation Approach
The radiators were removed carefully so the existing mounting arrangement and supporting wall could be inspected properly.
Where the original fixing points were not suitable for the weight of the radiators, the wall structure was strengthened before the units were repositioned and securely mounted. Careful attention was given to the fixing method, radiator alignment and safe support of each unit.
Any necessary adjustments to the associated heating pipework were also completed to ensure the radiators were correctly connected and able to operate reliably.
Once reinstalled, the radiators, valves and connections were checked thoroughly to confirm that the units were secure, correctly positioned and functioning as intended.
End Result
The completed remedial work provides a safe, stable and properly supported designer radiator installation.
The reinforced mounting arrangement, secure fixings and checked pipework have created a reliable installation designed for safe long-term use.
Need Designer Radiators Installed or Repaired?
Heatworks carries out designer radiator installation, replacement and remedial work throughout South Wales.
We can inspect unsafe or poorly mounted radiators, assess the wall and fixing arrangement, and recommend the work required to create a secure and reliable installation.
Contact Heatworks to discuss your radiator installation or repair.
Mosaic Bathroom Refurbishment Project
This project involved refurbishing an existing shower room and fitting supplied custom bathroom furniture to create a clean, practical and well-finished space.
Bathroom refurbishments require careful planning to ensure the plumbing, fixtures and furniture all work together correctly. As part of our bathroom installation and refurbishment services, each project is completed with long-term reliability, usability and appearance in mind.
Scope of Work
- Refurbishment of the existing shower room
- Installation of new bathroom fixtures
- Fitting of supplied custom bathroom furniture
- Associated plumbing alterations where required
- Final testing and inspection of the completed work
Installation Approach
The existing shower room was assessed before the new fixtures and supplied furniture were positioned and installed.
Careful attention was given to the layout, alignment and available space to ensure the custom furniture fitted neatly within the room. The associated water supply and waste connections were adjusted where required to suit the new arrangement.
Any necessary improvements to the property’s existing plumbing system were completed as part of the refurbishment to support reliable long-term performance.
Before handover, all fixtures, fittings and plumbing connections were thoroughly tested to confirm safe, reliable and leak-free operation.
End Result
The completed refurbishment provides a modern, practical and attractive shower room with the custom bathroom furniture integrated neatly into the overall design.
The new fixtures, updated plumbing and carefully completed finishing work have created a durable space designed for comfortable everyday use.
Need a Bathroom Refurbished?
Heatworks carries out complete bathroom and shower room refurbishments throughout South Wales.
We can assist with plumbing alterations, fixture installation, fitting supplied bathroom furniture and completing the associated work required to deliver a reliable finished space.
Bathroom Installations in South WalesCentral Heating Projects in South WalesKitchen Installations in South Wales
Full House Refurbishment
Full House Refurbishment Project
This project involved a complete refurbishment of the property, including installation of a new central heating system, a new kitchen, a new bathroom and an additional cloakroom beneath the stairs.
Full property refurbishments require careful coordination so the heating, plumbing, room layouts and final fittings all work together correctly. As part of our central heating services, kitchen installations and bathroom installations, each stage was planned with practicality, reliability and long-term use in mind.
Scope of Work
- Installation of a new central heating system
- Installation of a new kitchen
- Installation of a new bathroom
- Creation of an under-stairs cloakroom
- Associated plumbing, fitting and finishing work
- Final testing and completion checks
Installation Approach
The different areas of the refurbishment were carefully coordinated to ensure the heating, plumbing, kitchen and bathroom work were completed in the correct order.
The new central heating system was installed to provide reliable and consistent warmth throughout the property. Plumbing services were then positioned and altered where required to support the new kitchen, bathroom and cloakroom layouts.
The under-stairs space was used efficiently to create an additional cloakroom without unnecessarily reducing the main living area.
Any necessary upgrades to the property’s existing plumbing system were completed as part of the wider refurbishment to support dependable long-term performance.
Once the installations were complete, the heating, hot water, water supply and drainage systems were thoroughly tested before handover.
End Result
The completed refurbishment provides a fully upgraded and more practical living space with modern heating, a new kitchen, a new bathroom and an additional cloakroom.
Careful coordination of the different trades and services has created a consistent finished result designed for comfortable everyday use and reliable long-term performance.
Planning a Full Property Refurbishment?
Heatworks carries out coordinated plumbing, heating, kitchen and bathroom refurbishment work throughout South Wales.
We can help plan and complete the different installations required as part of a wider property renovation, ensuring each system works correctly within the finished home.
Gym Sauna Conversion Project
This project involved removing an existing shower block within the ladies’ changing room of a local gym and converting the space into a contemporary sauna room.
Commercial conversion projects require careful planning so the existing services can be adapted safely and the finished space remains practical, durable and suitable for regular use. As part of our commercial plumbing services, the work was coordinated around the layout of the changing facilities and the requirements of the new sauna room.
Scope of Work
- Removal of the existing shower block
- Preparation of the area for the new sauna room
- Alteration of the associated plumbing where required
- Installation work to suit the new room layout
- Final finishing and completion checks
Installation Approach
The existing shower area was carefully stripped out before the available space, plumbing services and requirements of the new sauna room were assessed.
Any necessary pipework alterations were completed to suit the revised layout, with careful attention given to creating a clean and practical installation within a busy commercial environment.
The work was coordinated efficiently to minimise disruption to the gym while ensuring each stage of the conversion was completed in the correct order.
Where required, adjustments were also made to the property’s heating system to support the requirements of the converted space.
Before completion, the associated plumbing and heating work was checked thoroughly to confirm safe and reliable operation.
End Result
The completed conversion transformed the former shower area into a contemporary sauna room suited to the needs of the gym and its members.
The revised layout, adapted services and carefully completed finishing work have created a practical commercial space designed for regular long-term use.
Planning a Commercial Conversion Project?
Heatworks carries out commercial plumbing, heating and refurbishment work throughout South Wales.
We can assist with service alterations, room conversions and the plumbing and heating work required as part of a wider commercial refurbishment.
Contact Heatworks to discuss your commercial conversion project.
Bathroom Installations in South WalesCentral Heating Projects in South WalesKitchen Installations in South Wales
Light Refurbishment
Light Refurbishment Project
This project involved a coordinated refurbishment across several areas of the property, including converting a downstairs shower room into a utility room, refurbishing the upstairs bathroom and upgrading the heating system to a combi boiler.
Projects involving plumbing, heating and room conversions need to be planned carefully so each part of the work fits together properly. As part of our central heating services, boiler installation services and bathroom refurbishment services, the work was coordinated with long-term reliability and everyday practicality in mind.
Scope of Work
- Conversion of the downstairs shower room into a utility room
- Refurbishment of the upstairs bathroom
- Conversion of the existing heating system to a combi boiler
- Associated plumbing and heating alterations
- Final testing and completion checks
Installation Approach
The different stages of the refurbishment were carefully coordinated to ensure the utility room conversion, bathroom upgrade and heating work were completed in the correct order.
The existing plumbing and heating arrangements were assessed before the required pipework alterations were completed. The downstairs space was adapted to suit its new use as a utility room, while the upstairs bathroom was refurbished and connected to the updated plumbing system.
The heating system was converted to a combi boiler, removing the need for the previous arrangement and creating a more practical setup for the property.
Where required, improvements were also made to the property’s existing plumbing system to support the new room layouts and ensure reliable long-term operation.
Once the work was complete, the plumbing, heating and hot water systems were thoroughly tested before handover.
End Result
The completed refurbishment has improved the practicality and use of space throughout the property.
The former downstairs shower room now provides a functional utility area, the upstairs bathroom has been upgraded, and the new combi boiler provides a modern heating and hot water setup designed for dependable everyday use.
Planning a Refurbishment Project?
Heatworks carries out coordinated plumbing, heating and bathroom refurbishment work throughout South Wales.
We can assist with room conversions, bathroom upgrades, heating system alterations and boiler installations as part of one carefully planned project.